ZERO FAILURES
InduraFloor Is Expanding!
If you have had difficulty reaching an InduraFloor Rep, we do apologize. We are expanding our West Coast Operations into our fourth Building. 8,000 square feet of Studio, Lab, and Distribution facilities located in Long Beach, California. Please be patient as we transition our Offices, logistics, and phone systems to the New offices. For immediate attention call (657) 272-1113
SOLUTIONS for a LIFETIME of DURABILITY
InduraFloor, Inc. offers high performance epoxy flooring systems and industrial grade epoxy resin coatings for residential, commercial and industrial interior and exterior surfaces. Our Industrial grade epoxy resin coating products transform floors into durable and easy to maintain surfaces.
HYDROBLOK 1100™ by InduraFloor
GUARANTEED TO BLOCK MOISTURE & VAPORS
A Primer designed to be applied directly over almost any surface, avoiding costly and time-intensive removal, shotblasting or grinding. Our system forms an impenetrable barrier to moisture, vapors and odors and is an excellent seal for leaks and drafts. InduraFloor coats do not delaminate and are resistant to the harshest of consumer chemicals, as well as sewage and water. HydroBlok 1100™ MVB Primer by InduraFloor is non-toxic and gives off ZERO VOCs, eliminating risk of exposure to any harmful chemicals or smells during the installation process or the final finished product. Combine HydroBlok 1100™ with one of our UV-protectant TopCoats, Polyaspartic PATC™ or 1KDiamond™, for a complete color-fast, smooth or textured, fine finished look that is designed to last.
InduraFloor's HydroBlok Primer, designed to be directly applied without extensive prep and with an adhesion exceeding 1100 psi, was recognized and awarded during the 2022 World of concrete - the only international event dedicated to the commercial concrete and masonry construction industries - as Innovative New Product in its category.
InduraFloor is DoD SPEC'D FOR MILITARY FACILITIES INSTALLATIONS
​
-JSDF (Japan Self-Defense Force)
-DoD (Department of Defense United States)
-US Marine Corps, Army, Navy, and Airforce
-Federal and State Facilities projects
InduraFloor Products have been approved and specified on many military and government installations, currently being installed at US Airforce Bases in Alaska, marine Corps Base California, and Army Bases across the East Coast.
Applications in Troops Quarters, Operational Logistics Facilities, Armored Vehicle Divisions, and Airwing Division Maintenance Hangers
Looking for professional epoxy flooring suppliers and installers in the greater Los Angeles or New York Area?
Contact our Partners at Epoxy.LA for LA County and Ventura County, go to Epoxy.LA Floors for Orange, San Bernadino, San Diego or Riverside County or for our East Coast Installers of InduraFloor Coatings, contact Epoxy.LA-NY, serving the greater New York Metropolitan area. Click the logo to go to the website or call:
Ventura County, Santa Barbara, & L.A. County, Contact Matt (661) 753-7565
Orange County, San Diego, and Southern California Contact JM (657) 272-1113
ColorFlake 1100™ DesignerCoat
DESIGNED TO BE UNIQUELY YOURS
Our ColorFlake Coating is developed to hold the unique look of the surface. It can be used in a variety of configurations, or bought in our Two-Step "ColorFlake" or Three-Step "InduraKit" System. Always apply a Primer before applying a Designer Coat.
Choose from 12 standard colors, 5 safety colors or our variety of metallic pigments and flakes and, if needed, based on the traction needs of your location, adjust the texture of the waterproof surface of your ColorFlake 1100™ System by adding nonSkidGrit™.
For additional UV protection and to provide superior abrasion resistance, finish with our 1K Diamond™ TopCoat. If your surface requires additional protection (such as in Food, Healthcare or Hospitality environments) fortify surfaces where it counts with our antimicrobial NanoCoat PATC™ TopCoat.
Our Two-Step ColorFlake System includes Primer and Designer Coat and your choice of color and flakes
Select our Three-Step InduraKit System to get Primer, Designer Coat with selected color and flakes as well as a TopCoat for UV protection.
Polyaspartic PATC™ TopCoat
ENGINEERED TO LAST A LIFETIME
Engineered to provide the most durable protective coating for interior and exterior surfaces. Polyaspartic PATC™ protects surfaces from degradation due to spillage and wear. Its inherent chemical resistant and UV-protectant properties offer superior resistance to abrasion and damage from impact and ensure designer finishes remain color-fast. Polyaspartic PATC™’s industry-leading self-leveling qualities ensure an exceptional coating, every time. Polyaspartic PATC™ is an exceptionally durable, two-component, polyaspartic coating that contains ZERO VOC, and is designed to provide exceptional adhesion to epoxy primers.
nonSkidGrit™
FOR TEXTURE AND TRACTION
High gloss epoxy surfaces with a fine finished look may become slippery when wet. Additional traction and slip resistance is created by adjusting the texture of the surface with a slip resistant additive. Add the grit into the Coating and apply as usual. Our Translucent Grit does not impact the underlying epoxy color. Excellent for barefoot, agricultural, livestock or marine deck applications to increase texture and traction on porches and decks, pool sides, showers and steps, livestock areas, barns, kennels, launch ramps, docks and transom platforms. For heavy duty industrial grade traction grit, contact our sales office.
DTQ/DTO/DTR
SOLUTIONS FOR OIL, RUST AND QUARRY TILE
Our "Direct-To" series brings Primers to a new level. Each product is designed to be applied directly to impossible surfaces. Because Our Direct-To Primers can be applied directly over oily surfaces, rust and onto quarry tiles in commercial kitchens, costly, time-intensive and potentially hazardous preparation such as chemical removal, shotblasting or grinding can be avoided.
In addition to this, because the DIrect-To Primers by InduraFloor are non-toxic and give off ZERO VOCs, the risk of exposure to any harmful chemicals or smells during the installation process or the final finished product is completely eliminated.
HYDROFLEX 2200™ MVB Primer
CREATED TO WITHSTAND THE ELEMENTS
HydroFlex 2200™ is created with impact strength in mind and is focused on the demands of the Marine Industries, where tomorrow's oceans need today's sustainable solutions. Add texture and traction on decks, ramps and platforms by including nonSkidGrit™. Although designed for marine applications, the properties of HydroFlex can also be of excellent use for a variety of wet applications on land. Think not only saunas, laundry rooms, pools and patios, but also specifically saltwater pool decking hardscapes and steps and walkways subject to wintertime ice-melt salt applications.
Some of our customers in the US and Canada:
BAKERY
Langara College
BC HYDRO
InduraFloor’s research focuses on the development of strong, durable and ecologically sound materials in the polymer matrix and formulates materials that offer solutions for commercial, industrial and residential surfaces. Our products are manufactured domestically and supplied from our Production Facility directly to trusted partners, contractors and distributors nationwide.
2330 E. Artesia Blvd.
Long Beach, CA 90805
